Lever Lockset
Specifications:
- Door Range 1-3/8 in. to 1-3/4 in. thickness doors.
- Backset 2-3/4 in. Standard, 2-3/8 in., 3-3/4 in.
- Front 2-1/4 in. x 1-1/8 in., adjustable for flat or beveled doors 1/8 in. in 2 in.
- Strike ASA strike standard. “T” and full lip strike available on request.
- Latchbolt 1/2 in. Throw solid brass, reversible for RH or LH applications. UL listed.
- Latch and Stick Screws 8-32 X 1 in. FPH dual purpose.
- ANSI Standards Meets or exceeds of BHMA/ANSI A 156.2 Series 4000, grade 2(FF-H 106C), 400,000 cycles.
- Exposed Trim Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.
- Keying 6-pin “C” keyway cylinder, 2 keys per lock.
- Cylinders & Keyways 6 pin solid brass “C” keyway standard
- SL00 US26D
Deadbolt
Bore diameter – 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.
Specifications:
- Wrought Brass or Stainless Steel.
- Adjustable 1 3/8 in. (35mm) to 1 3/4 in. (45mm) door thickness.
- Backset adjustable 2 3/8 in. or 2 3/4 in..
- Deadbolt faceplate – standard 2 1/4 in. X 1 in. packed with 1/8 in. plastic filler to convert 1 in. face plate to 1 1/8 in. wide door preparations.
- Bore diameter – 1 in. for latch, 1 1/2 in. or 2 1/8 in. for lock housing.
- Strike – 1 1/8 in. X 2 3/4 in. square corner.
- Keyways – 6 pin solid brass “C” keyway standard.
- LSD01 US26D
Threshold
- Save on your electricity bills by preventing cold air draft from passing beneath the floor by adding thresholds.
Specifications:
- Height:1/ 2 in. (12.7mm)
- Width: 6 in. (152.4mm)
- CCR2726
- Gasket
- Seals the gaps around the top & two sides of a door. It contains (1) Jamb Header piece and (2) Hinge & Strike Jamb pieces of weatherstrip.
Specifications:
- Width: 1/4 in. (6.4mm)
- Profile Height: 7/8 in. (22.2mm)
- Total Height: 1 1/8 in. (28.6mm)
- PG-603
- Door Shoe
-
Door Shoe is applied to the underside of the door creating a barrier against dust, drafts, light, smoke, and fire without compromising the aesthetics of the door.
Specifications:
- Width -1 1/4 in. (31.8mm)
- Profile Height -1 5/16 in. (33.3mm)
- Total Height with Insert – Approx. 1 7/8 in. (47.6mm)
- DSR-408
- Seals the gaps around the top & two sides of a door. It contains (1) Jamb Header piece and (2) Hinge & Strike Jamb pieces of weatherstrip.
Reviews
There are no reviews yet.